3.0ml Ready-to-Use (RTU) Cartridge Assembly with Short Stopper, 1 Tub- 100 Cartridges

3.0ml  Ready-to-Use (RTU) Cartridge Assembly with Short Stopper, 1 Tube - 100 Cartridges (217211-tub)

Key Features

• Cartridge Specifications:  Volume:  3.0ml,  OD: 11.6mm, H: 64.1mm
• Cartridge Weight:  5g
• 100 tub of 100 cartridges
• 10 x 10 Nested Rack
• Package Weight:  785g/Tub

• Package Dimensions:  260.7mm x 220.5mm x 88.2

• For use with insulin injection pens

Product Details

• ISO 16608-3, ISO 13926-1,  3mL cartridges 

• Steam sterilized (SAL = 10^-6), Ready-to-use

• Tyvek 1073-B Steam Permeable Autoclave Bag packaging
• Cartridge body is made using Schott Pharma Type I Borosilicate Glass
• Cartridge cap is West Pharma, Aluminum Crimp
• Dual layer septa is West Pharma Polyisoprene, Bromobutyl Rubber
• Stopper is West Pharma, Bromobutyl Rubber 8.2mm "short style"
• Rubber stopper is made of Butyl Bromide

Quality Details

• Biocompatibility Test - Per USP: skin irritation, sensitization, in vitro hemolysis
• Physicochemical Purity Test - USP <1663>/<1664> compatibility; particulate matter per YBB00272004-2015
• Heat Resistance & Internal Stress - YBB00132004-2015 standards
• Water Resistance - Meets Level 1 at 121°C; HC1 level internal surface
• Silicone Uniformity & Quantity - ≤1mg silicone oil in 3mL cartridge; passes uniformity test
• Aluminum Cap Fit & Coating Adhesion - Compatible with borosilicate glass; coating resists ethanol/isopropanol
• Rubber Stopper Adhesion & Coring - Separation force ≥1.0N; ≤3 particles from 50 punctures
• Seal Integrity - Pressure-holding test under -95 kPa vacuum
• Sterility & Endotoxin-Free - 2020 Chinese Pharmacopoeia; immersion & colorimetric methods
• FDA 510k cleared (K240774) - legal for medical use in the USA
• Successfully applied for CDE number; CE MDR, FDA (510k) has been submitted for review

• ISO 11608-1 Compliant

• Produced in cGMP, ISO 13485:2016 and ISO 9001 facility

Nest Scientific cartridges are purpose-built for peptide- and protein-based injectable therapies, providing a sterile, high-quality, ready-to-use (RTU) solution optimized for ISO 11608 insulin pen–style delivery devices.

Manufactured from clear Type I borosilicate glass with high hydrolytic resistance, each cartridge is held to strict dimensional tolerances, ensuring precise dosing, minimal extractables and leachables, and reduced breakage risk. The result is consistent performance and reliable drug delivery across a wide range of biologic formulations.

For added protection, cartridges remain nested throughout fill-finish processing, preventing glass-to-glass contact. Each rack is sterilized via a rigorous six-hour steam autoclave cycle—offering complete sterilization, unlike ethylene oxide gas, which cannot penetrate the dual septa interface.

Nest Scientific tubs are dimensionally identical to SCHOTT cartriQ® Ready-to-Use Cartridge Tubs, enabling seamless integration into existing fill-finish lines without the need for change parts.

• Packaging: 1 tub (100 cartridges)

• Extensive validation binder available upon request